Tiller is a mechanical device used for farmland cultivation. It is widely used in places where large and medium-sized agricultural machinery cannot reach, such as hills, mountains, greenhouses and orchards. Its usage is as follows:

Assembly and preparation

Inspect the equipment: Before use, confirm that the equipment is in good condition, check whether the tool is intact and without defects, and ensure that the parts are firmly fixed.

Check fuel and lubricants: Make sure there is enough fuel and lubricants in the fuel tank and lubricant tank, and check whether they are in normal working condition.

Wear personal protective equipment: Wear a helmet, mask, earplugs, protective gloves and anti-collision shoes, etc.

Clear obstacles: Clear obstacles and weeds around to ensure the normal operation of the equipment.

Operation steps

Start: Place the tiller on a flat ground, insert the key to turn on the ignition switch, pull up the starter handle, pull the starter hard until the engine starts, and wait for the engine to preheat for a while.

Use: Place the tiller on the land to be tilled, open the throttle, adjust the throttle lever so that the engine operates within the appropriate speed range, select the appropriate walking speed and steering method, and move the tiller in a uniform direction.

Stop and store: After using the tiller, adjust the throttle to the lowest gear, then stop the engine, disconnect the ignition switch, take out the key and place it in a safe place.